(PRESCRIBED UNDER RULE 56A)
TEST REPORT ................ DUST EXTRACTION SYSTEM
1.Description of system
2.Hood
- Serial No. of Hood.
- Contaminant captured.
- Capture velocities (at points to be specified).
- Volume exhausted at Hood.
- Hood static pressure Design Actual Value
3.Total pressure drop at
- Joints
- Other points of system (to be specified)
4.Transport Velocity in Dust (at points alone dust to be specified)
5.Air cleaning Device.
- Type used.
- Velocity at inlet.
- Static Pressure at inlet.
- Velocity at outlet.
- State Pressure at outlet.
6.Fan.
- Type used.
- Volume handled.
- Static pressure.
- Pressure drop at outlet of fan.
7.Fan Motor.
- Type.
- Speed and horse Power.
8.Particulars of defects, if any, disclosed during test in any of the above components.
I certify that on this............day of ............the above dust extraction system was thoroughly cleaned and (so far as its construction permits) made accessible for thorough examination. I further certify that on the said date, I thoroughly examined the above dust extraction system including its components and that the above is a true report of my examination.
Signature ............
Qualification...........
Address ...............
Date ...............
If employed by a Company or Association give name and address.